DHT56-05 Down-Hole Drive

The DHT56-05 Downhole Motor Drive from Performance Controls, Inc. (PCI) is a fully digital motor controller designed for long life in harsh environments in down-hole applications such as Directional Drilling, Horizontal Drilling, MWD, LWD, and Wireline. The amplifier can control a BLDC servo motor in torque or velocity loop mode and can be digitally configured for a wide range of motors.

  • For Brush, BLDC Motors

  • 56 VDC, 3 A Continuous, 5.1 A Peak

  • 350 deg F (175 deg C) Operation

  • Fully Digital


The DHT56-05 Downhole Tool Motor Drive can be used in these and other applications:

  • Directional and horizontal drilling
  • MWD (Measurement While Drilling)
  • LWD (Logging While Drilling)
  • Wireline

Features and Benefits

High Temperature Operation

Independently tested to operate at 350 deg F (175 deg C)


Enables survival under the shock and vibration conditions associated with down-hole services.

Small Size

17 x 1.85 x 0.10 inches (432 x 47 x 2.6 mm) for the PCB.

Sensorless Control

Increases reliability and reduced overall packaging through elimination of failure-prone Hall sensors and bulky cabling.

Power Saver Mode

Extends the life of the battery when activated.

Advanced Commutation

Space Vector Commutation and Flux Vector Current Control improve bus voltage utilization for improved torque/speed curves, improved energy efficiency, and reduced heat dissipation.

Digital Tuning

Optimizes performance, enables cloning, eliminates pot drift, and reduces inventory through the use of the same drive for multiple applications.


Allows adjustments to start-up current limit and ramp rate, and other parameters.

Extensive Fault Protection

Protects the amplifier and the motor, and can be individually programmed by the OEM.


PCI can modify the drive to make it compatible with an OEM’s system.


Copyright 2014-2023 PERFORMANCE CONTROLS, INC.® PCI reserves the right to correct errors. Information is subject to change. Please contact factory for current information.